GM-6A Deep Foundation DTH Auger Jet Grotuing Drilling Rig
GM-6A is multipurpose clawer type full hydraulic engineering drilling rig.
Features:
■ Wide luffing angle, the drilling rig can do multi-row and multi-angle drilling in one position, with strong adaptability.
■ With crawler self-propelled function, and equipped with frame rotation device, the equipment can be moved conveniently and quickly.
■ Optional orifice single clamp holder or double clamp holders, equipped with special shackle tools, it is more convenient to disassemble the drill pipe, , which effectively reduces the labor intensity and installing and disassembling drill pipe.
■ Hydraulic system adopts imported brandscomponents,which is stable, reliable, and has a long service life.
■ The power head adopts hydraulic speed change mode, which can be stepless speed change within a certain range, and has high and low gears.
■ The console can swing and rotate, Easy observation through adjustable distance between the orifice and rig.
■ The rolling sliding way of the power head,it males the drilling angle is stable and low maintenance cost .
■ Modular design, the whole machine reserves the position of the spare hydraulic system, which is convenient for the later upgrade and modification of the top drive head for the top drive construction.
Usage:
GM-6A Jet Grouting Drilling Rig is mainly used for rotary drilling, auger drilling, pneumatic DTH hammer drilling, follow-up drilling, and high-pressure jet grouting .
Application of construction:
1. Tunnel pipe-shed support, advanced forecasting
2. Deep foundation
3. Anchoring
4. Blastholes in open-air quarrying ,
5. Anti-floating anchoring
6. Geothermal pump holes,
7. Hydrological wells
8. geological disaster control.
Main parameters
Drilling depth | 50-200m |
Drilling hole diameter | φ50-φ200mm |
Drill pipe diameter | φ50—φ89 |
Power head speed | Low:0-60r/min High: 0-120r/min |
Power head torque | 8000N.m-4000N.m |
Power head stroke | 3400mm |
Maximum feed force | 30kN |
Maximum pulling force | 65kN |
Arm sliding stroke | 900mm |
Arm pitch angle | 90°~ -10° |
Arm swing angle | ±25° |
Horizontal hole height | High:3100mm Low: 2100mm |
Driving speed | 1.5km/h |
Climbing ability | 20° |
Motor Power | 55+5.5kW |
Dimensions of drilling rig | L:5m×W:2.2m×H:2.3m |
Total weight | 7500kg |