GM-5S Crawler Type Anchor Drilling Rig for Sa;e
GM-5S Horizontal Lifting Multifunctional Drilling Rig is a fully hydraulic crawler drilling rig that can meet the requirements of various construction techniques by integrating deep foundation pit slope anchoring, rotary jet, and waterfall. This drilling rig is developed by our company after long-term market research and customer communication to meet the complex deep foundation pit anchor support construction conditions, with the deep foundation pit slope support process as the main, rotary jet construction as a supplement. It has the characteristics of good mobility, a wide range of operating holes, high efficiency, good drilling quality, and low pollution, etc.
1. Simple system structure, easy maintenance, and low cost;
2. The maximum horizontal lifting height is 3.3 meters and the minimum is 1.8 meters, and it can construct double rows of anchor cables at one time;
3. Selective power ratio effectively reduces power consumption and waste;
4. The overall structure is simpler, the layout is more reasonable, and the operation is easy to understand and humanized;
5. It can be equipped with a rig crane, which can effectively reduce the labor intensity of workers and reduce labor costs;
6. The frame slewing adopts a large diameter slewing bearing, so the hole position can be easily turned to the side of the track manually when needed.
7. Equipped with a single gripper at the hole and a special unloading tool, it is more convenient to dismantle the drill pipe. It can also be equipped with double grippers, which reduces the labor intensity and operation time of drill pipe loading and unloading.
Matching Drill Tools :
The anchor hole drilling equipment is mainly an anchor drilling rig. According to the structure, anchor drilling rigs are divided into monoblock type, drilling car type, and machine type; according to the power, they are divided into electric type, pneumatic type, and hydraulic type; according to the rock-breaking mode, they are divided into rotary type, impact type, impact rotary type and rotary impact type. The drilling tools used with anchor drilling rigs are different according to the rock-breaking methods, in general, there are rotary rock-breaking tools, impact rock-breaking tools, and rotary impact rock-breaking tools.
|Max Diameter||Max 2m|
|Rotation Speed||Low 0-10(r/min)||High 0-140(r/min)|
|Drill Pipe Diameter||Φ50mm,Φ73mm,Φ76mm,Φ89mm|
|Pitch Angle of Column||90°~ -10°|
|Contact Person :||Lena|